Ocean Signal AIS-MOB1, Руководство пользователя

Страница: 10 / 20

MOB1 USER MANUAL
10 Part No 912S-01517
TEST/OFF Key for at least fifteen seconds. The LED will start flashing green. When ready
press the
Yes
Key on screen.
The display will now change to the programming
mode. Place the MOB1 over the screen so that the
clear STROBE indicator window is over the white
box. Press the <F10> Key on your keyboard to
commence programming.
When the programming is complete, the screen will
change. Remove the MOB1 and check that the LED
starts flashing green. Turn the MOB1 off by pressing
the TEST/OFF Key for one second. The LED will
blink red twice. Press the <F12> Key to exit the
programming mode.
If the programming fails, the LED will start flashing
Red after a short period of time. Turn the unit off by pressing the TEST/OFF Key and retry.
When programming is completed, return the arming tab to the locked position. Your MOB1
is now ready for fitting to the life jacket (Section
3) for use.