Ocean Signal AIS-MOB1, Руководство пользователя

Страница: 12 / 20

MOB1 USER MANUAL
12 Part No 912S-01517
5.3 DSC All Ship Distress Alert transmission
Applies only in countries where DSC All Ships Alerts are allowed.
Press and hold the ON Key for over 5 seconds to transmit a single DSC All Ships Distress
Alert. This should only be done in a dire emergency, if it is obvious that your alert is not
being acted upon by you own vessel. After the key is pressed, the Green LED will start
flashing then become steady. Release the key to commence transmission of a single DSC
transmission. The LED will blink rapidly to indicate a DSC Distress is being transmitted to
ALL SHIPS; red if there is no position available and green when GPS position is being
received.
5.4 Deactivation
To deactivate your MOB1 after use or if it is accidentally activated, press the TEST/OFF Key
until the LED flashes red twice, then release.
5.5 Rewinding the antenna
To rewind the antenna after activation or transmission testing,
use the small grey Antenna Rewind tool supplied in the box.
Place the moulded cap of the antenna into the space (1) and pass
the tool through the round hole in the top of the MOB1 and place
over the antenna spring just behind the cap (2). Rotate the tool
anti-clockwise until the antenna is fully wound up (3). Whilst
holding the antenna in place with the tool, replace the activation
slide and remove the tool (4).
If the MOB1 has activated, turn it off by pressing the TEST/OFF
Key until the LED flashes twice (5).
Rotating the antenna rewind tool in the clockwise direction may result in
damage to the antenna
2
1
3
4
5