Ocean Matrix OMX-SW6x6, Инструкция по эксплуатации

Страница: 5 / 17

4
Figure 1:
OMX-SW6x6
Front Panel Features
Table 1:
OMX-SW6x6
Front Panel Features
No. Feature Function
1.
Power
Switch Illuminated switch: supplies power to the unit.
2.
OUTPUT
SELECTOR
buttons
Select the desired output that the input signal is switched to.
3.
INPUT SELECTOR
buttons
Select the desired input to be switched to the output.
NOTE: Pressing input buttons "1", "2" and "3" together resets the machine and
performs a 7-segment display test.
4.
OUTPUT STATUS
labels
Identifies a crosspoint between each output and the input below it.
5.
INPUT STATUS
display
Displays the selected input switched to the output (marked above each input).
6.
RCL illuminated
button
Should be pressed, followed by an input or output pushbutton to select a
predetermined setup (1-6 available). For example, press
RCL
followed by
INPUT
4
button to recall Setup # 4 from the non-volatile memory.
7.
STO
illuminated
button
Should be pressed, followed by an input or output pushbutton to store the current
status in the non-volatile memory. For example. Press
STO
followed by
INPUT 4
button to store Setup # 4 in the non-volatile memory.
NOTE: To delete a setup from the memory, press the STO and RCL buttons
simultaneously, followed by the input button (Setup number) to be deleted.
8.
AFV
illuminated
button
When pressed, illuminates and selects the "
Audio Follow Video
" function. If the
audio configuration differs from the video configuration, the
INPUT STATUS
display flashes the audio outputs that are to be reconfigured for AFV operation. In
such case, the
TAKE
button must be pressed to confirm the modification.
9.
AUDIO When pressed, illuminates and selects the audio mode (Breakaway) to enable
modification of the audio crosspoints.
10.
VIDEO When pressed, illuminates and selects the video mode (Breakaway) to enable
modification of the video crosspoints.
11.
TAKE The machines can operate either in "
Take"
mode or in "
Normal"
(no user
confirmation for each action is needed) mode. Pressing the
TAKE
button toggles the
mode, and the button illuminates when in " Take Mode ". In " Take Mode ", any
action would cause the TAKE button to blink before implementation, and the user is
required to press
TAKE
again in order to implement the operation.
NOTE: To cancel any operation initiated by pressing a button, press the same
button again.
12.
OFF When pressed after pushing an output button, disconnects that video/audio output
from the video/audio input. To disconnect all the outputs, press the
ALL
button
followed by the
OFF
button.
13.
ALL
When pressed followed by an input button, connects that audio/video input to all
audio/video outputs.