Ocean Matrix OMX-SW5x5, Инструкция по эксплуатации

Страница: 20 / 30

Operating the OMX-SW5x5
17
8.5 Storing/Recalling Input/Output Configurations
You can store and recall
1
up to 10 input/output configurations using the 5
input buttons and the 5 output buttons, as Figure 11 illustrates:
Figure 11: Storing and Recalling using the Input / Output Buttons
2
8.5.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the 10 Input / Output buttons (this will be the setup # in which the
current status is stored). If in the CONFIRM mode, press the blinking TAKE
button to confirm the action.
The memory stores the data at that reference.
8.5.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate Input / Output button (the button # corresponding to the
setup #). If in the CONFIRM mode, that setup configuration will blink in the
7-segment Display, together with the RCL button and the TAKE button, and
will only be implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
Tip : If you cannot remember which of the 10 input/output configurations is the
one that you want, set the OMX-SW5x5 to the CONFIRM mode and manually
scan all the input/output configurations until you locate it.
1 The 10 input/output configurations (or setups) also include the relevant audio-follow-video / breakaway option definition
2 The gray numbers (1 to 10) in Figure 11 that illustrate the corresponding store/recall configuration numbers, are for the
purpose of illustration only and do not appear on the buttons