Ocean Matrix OMX-SW5x5, Инструкция по эксплуатации

Страница: 18 / 30

Operating the OMX-SW5x5
15
8.2.1 Setting the Audio-Follow-Video Option
To set the Audio-follow-video (AFV) option:
1. Press the AFV button.
The AFV button illuminates. The audio will follow the video.
If the audio configuration differs from the video configuration, the
audio input(s), which will be changed, will blink in the 7-segment
Display, and the AUDIO and TAKE buttons will also blink
1
.
2. Press the TAKE button to confirm the modification (reconfiguring the audio
according to the video).
8.2.2 Setting the Breakaway Option
To set the Breakaway option, press either the AUDIO (for audio control only)
or the VIDEO (for video control only) button.
If the AUDIO button illuminates, all switching operations, and the
7-segment Display, relate to the Audio section
If the VIDEO button illuminates, all switching operations, and the
7-segment Display, relate to the Video section
8.3 Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1. Press an OUT button (either 1, 2, 3, 4 or ALL).
The 7-segment Display blinks.
2. Press an IN button (either 1, 2, 3, 4 or OFF).
The selected input switches to the selected output.
For example, press the ALL button and then IN button # 2 to connect input #
2 to all the outputs.
8.4 Confirming Settings
Choose to work in the AT ONCE or the CONFIRM mode, as section 8.4.1
describes. When the
OMX-SW5x5
operates in the AT ONCE mode (TAKE
button is not lit), pressing an OUT-IN combination implements the switch
immediately. In the CONFIRM mode (TAKE button is lit), the TAKE button
must be pressed to authorize the switch.
1 Warning that changes are about to occur in the audio section