2.5
Begin recording using the IR Remote Control
You may use the remote control to start recording.
•
Press ‘START’ to start recording.
•
Press ‘STOP’ to stop recording.
•
If you have set a recording to start recording at a
later time, the recorder will blink red to indicate it
is ‘armed’ and waiting.
•
The ‘armed’ state is cancelled by pressing Stop key.
•
Re-enable the armed state by pressing the ARM
button.
•
You can verify recording has started by checking
for slow blinking of the status (green) indicator.
•
Note that the remote is splash proof and designed to tolerate wet hands. Don’t attempt
to use it underwater
–
you’ll be disappointed.
