Figure 2
–
Deploy Control
2.4
Configure the deployment
•
Select the ‘Deploy’ tab as shown in figure 2.
•
Configure the deployment parameters as follows:
o
The ‘
Recording Starts
’ sect
ion determines when recording will begin. Recording can
begin immediately on disconnection of the USB cable, at a pre-determined date and
time, or manually using the IR remote control. Note that the remote can always be
used to override the other options.
o
The ‘
Recording Schedule
’ section provides selection of continuous or periodic
recording. For continuous recording simply leave the ‘Periodic Recording’ option
unchecked.
o
Options available in the ‘
Audio Options’
will vary according to your device’s
capabilities. Options include the following:
▪
Channel Selection
selects which channels to record on.
