10
180 minutes with the step of every 15 minute.
You also can do the setting with the “Sleep” button from remote control, when you press
“Sleep”, then you can see the sleep timer on the top right corner of the display.
Buffer
You can select your preferred buffering time.
Weather
You can set the display of weather forecast on the standby mode and the temperature units.
-You can select Weather Display On/Off and Location.
-Temperature units
：
1) Centigrade(°C) 2)Fahrenheit (°F)
FM Setup
You can set the Stereo or Mono on the FM and select the region of your location.
Local Radio Setup
The radio will detect your local area stations automatically and it will display under the
“Internet radio” you will find all the stations under “Internet radio”
“Local Radio”.
If you would like to change the Local area stations to other countries, you can choose “Manual
setup” to make the change.
Playback Setup
You can set up the playback as Off, Repeat one, Repeat all, Shuffle
DLNA Setup
When the WR-60 radio is connected by other DLNA devices, the name of the radio will appear
as “AirMusic”. This is the name in default. You can change other name here as you desire.
Please note: The DLNA feature is compatible and works with corresponding Android APPs.
Apple devices are not supported.
Equalizer
Select your prefer music effect.
Software update
1) Upgrade information will pop up on the display when there is upgrade version on the server.
2) When there is upgrade version available on the server, you can do the manual upgrade from
the update menu.
Reset to default
You can do this factory reset to empty all of the settings and it comes back to default settings.
**Please note all the Station presets, Settings and configuration will be lost after you have
performed the “Factory Reset”.
Remark: Playing stopped when it comes back to default settings and skip into Language
Setting automatically, after that it will turn to the internet setting.
Trouble Shooting
1. If you have trouble connecting the radio to your wireless network, these steps may
help to resolve the problem:
- Confirm that a Wi-Fi or Ethernet Wired connected PC can access the internet (i.e. can
browse the web) using the same network.
- Check that a DHCP server is available, or that you have configured a static IP address on
the radio.
- Check that you firewall is not blocking any outgoing ports.
- Some access points may be set so that only equipment with registered MAC addresses
can connect to them. This is one possible cause of the Internet Radio being unable to
