9
Manual Configuration
You can set the DHCP on or off, and enter the SSID as you known, or delete the connected
WiFi.
Check network when power on
This is set to enable or disable “Check network when power on”.
Date & Time
Currently Date & Time setting
You can press“
”
“
”buttons for parameter setting, and move cursor with“
”
“
”buttons and
press ‘Enter’ to confirm.
Time Format setting
Time format setting
：
12hours / 24hours
Date Format setting
Date format: YY/MM/DD, DD/MM/YY and MM/DD/YY
Daylight Saving Time (DST)
Daylight Saving Time setting: On / Off
GMT: Set the currently time as GMT
Alarm Clock
1. Alarm Clock types
（
2 Alarm Clock setting
）
You can select your favorite Alarm setting for every day, once or particular day in the week.
2. Alarm Clock
（
NAP function
）：
If you would like to take a nap or need the Alarm in short
time, you can use this function. You can select the time from 5 minutes up to 120 minutes.
No Snooze function available for the NAP alarm.
3. Alarm Sounds setting
：
Beep/Melody/Internet Radio/FM
Remark: The NAP Alarm will only with beeping sound.
4. When the Alarm Clock goes on, press any key except for “Power” button, you can enter the
“Snooze” mode. You can press “Power” button to stop the ringing when the alarm goes on
5minutes later again.
Remark: You can select any internet radio station or FM station as Alarm tone from the favorite
station. When the internet station doesn’t work in 1 minute, it will auto set into Beep.
Language
There are 8 Languages available
You can choose the language from
English/German/French/Dutch/Danish/Norwegian/Russian/Swedish.
Dimmer
You can adjust the backlight of the LCD with below settings:
1. Power Saving
You can set the backlight to dim down when there is no operation for a certain time of period.
There are 20 levels of the backlight available.
2. Turn on
You can adjust the backlight level for the operation mode, i.e. when you are operating the
radio or checking on the menu.
3. Dimmer Timer
You can select to dim down the backlight after certain time of period with no operation on the
radio.
Power Management
This function is to allow the radio to go to Standby if there is no internet signal received in
order to save power. The default setting is 30 minutes. When the radio does not receive any
internet signal, the radio will go into Standby after 30 minutes. Other time frame for 5 minutes
and 15 minutes are available.
Sleep Timer
You can set the timer to put the radio on standby after certain time elapsed, from 15 minutes to
