22
6. The radio will start associating with the network and
followed with the message
"Association complete" if network
is successfully connected.
Remove AP - If you have already added a router and
want to remove it, choose this option.
Note - Always bring the radio within 2 meters of the Wi-Fi
router for setup.
• AP: [ ]
If you have added more than one routers on the radio
and want to switch to another one, select this option to
change.
• Signal
This is to show the strength of the Wi-Fi Signal of the Wi-
Fi router as received by the radio. Usually signal levels
lower than -70dBm is at weaker level and if it affects the
reception of your radio, you may need to optimize the
router location or check any problem of the router itself.
• IP
The IP is set Dynamic by default. Select to change Fixed
IP according to your network condition.
• DNS
The DNS is set Dynamic by default. Select to change
<Fixed> DNS according to your network condition.
Date and Time
The radio will set your local time automatically after the
internet connection is completed. If you want to do manual
setting, change it by the following options:
10. Configuration
