Audio output
The 3.5 mm audio output jack is to connect external powered speaker if you want to enjoy with
your other speaker system.
Q & A
If you are experiencing problems with your DAB radio there are some quick and easy checks
that you can do, which may help to solve the problem.
No DAB reception
-Please carry out “Factory Reset” on the radio and extend the antenna.
-Move the radio near to the window.
Radio reception is poor
- Please check that the wire antenna is extended for the maximum signal strength and move it
around in different direction to improve the reception.
- Use the manual tune to check if the specific frequency reception level.
- Check that you do not have other electrical equipment too close to your radio, causing
interference.
Cannot tune other radio station
- Under DAB mode, press the
<OK/Tune>
button first to enter the station list. Then use the
up/down button to choose your desire station to listen.
- Under FM mode, long press the
<OK/Tune>
button to scan the next available station, or
press the
<OK/Tune>
button once, the use the up/down button to fine tune the frequency
manually.
-
8
-
Main Menu of FM mode
While the radio is in FM mode, press and hold the
< INFO /
t
/ MENU >
button on the radio.
Most of the menus are the same as DAB mode, with the additional options as follow:
Scan setting
You can choose to scan “Strong station only”.
Audio setting
You can set if you prefer “Mono only”.
Main Menu of Aux-In mode
When the radio is in Aux-In mode, press and hold the
< INFO /
t
/ MENU >
button to enter main
menu.
All of the menus have the same function as the setting in DAB mode.
USB port for charging
There is a USB port on the radio for charging mobile devices at 5V 1A.
Содержание DB-825C
Страница 2: ...Service Only Audio Out 1...
