manualshive.com logo in svg

Ocean Breeze OBZ-09NPH, Руководство пользователя, Страница: 6 / 28

Поделиться
Скачать
Ocean Breeze OBZ-09NPH Скачать руководство пользователя страница 6

5

WARNING

This symbol shows that this appliance used a flammable refrigerant. If the refrigerant is leaked and exposed to an external ignition source, 

there is a risk of fire.

This symbol shows that the operation manual should be read carefully.

This symbol shows that a service personnel should be handling this equipment with reference to the installation manual.

This symbol shows that information is available such as the operating manual or installation manual.

CAUTION

CAUTION

CAUTION

- Please follow the instruction carefully to handle, install, clear, service the air conditioner to avoid any 

damage or hazard. Flammable Refrigerant R32 is used within air conditioner.

When maintaining or disposing the air conditioner, the refrigerant (R32 or R290) shall be recovered 

properly, shall not discharge to air directly.
- No open fire or device like switch which may generate spark/arcing shall be around air conditioner to 

avoid causing ignition of the flammable refrigerant used.

Please follow the instruction carefully to store or maintain the air conditioner to prevent mechanical 

damage from occurring.
- Flammable refrigerant -R32 is used in air conditioner. Please follow the instruction carefully to avoid 

any hazard.

IMPORTANT NOTE: Read this manual carefully before 

installing or operating your new air conditioning unit. 

Make sure to save this manual for future reference.

Caution: Risk of fire/

flammable materials

(Required for R32/R290 units only)

Содержание OBZ-09NPH





























Отзывы:

Нет отзывов