Ocea Soft Cobalt 2 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 19

Ocea Soft Cobalt 2 Скачать руководство пользователя страница 6

6 | Cobalt Temperature Monitor Installation

Introduction

Congratulations and thank you for choosing the Oceasoft Cobalt 2
wireless temperature monitor. This document covers Cobalt 2 modules
with either internal or external probes.

This Installation Guide describes how to get your new Cobalt 2 module
up and running. Detailed configuration instructions and software settings
are provided in the complete Cobalt 2 User Guide provided with your
product.

Pre-requisites

For the purposes of this Installation guide, we assume that:

ThermoClient/ThermoServer software is installed and
configured on your computer, and that you have appropriate
access rights to configure devices.

A Cobalt receiver is installed on your computer or network.

Please see the relevant product manuals for details on installing Cobalt
receivers and ThermoServer/ThermoClient software.

Package contents

Cobalt 2 wireless monitoring module with battery

Internal or external temperature probe

o

Digital Temperature Internal Modules (+10° to +50°C)
Ambient temperature measurement

o

Digital Temperature External Modules (-40° to +80°C)
Freezers, refrigerators, and cold rooms

o

Digital Temperature External Modules (-40° to +120°C)
Ovens, incubators, and water baths

Cobalt mounting kit with plastic holder, magnet, screws and
Velcro

®

For modules with external probe only:

o

Flat cable (-40°C to +80°C)

o

Sensor mounting kit with 2 wire-ties and 4 plastic
holders with adhesive backing

«
...
4
5
6
7
8
...
»

Содержание Cobalt 2




















Отзывы:

Нет отзывов