Ocea Soft Cobalt 2, Руководство по установке, Страница: 3 / 19

Notices | 3
Notices
Safety instructions
IMPORTANT NOTE: Do not use this product for protection or as part of automated
emergency system or as for any other application that involves protecting people
and/or property. Customers and users of Oceasoft products are responsible for
making sure that the product is fit for the intended usage. Do not open the product
casing and do not disassemble or modify internal components in any manner.
Oceasoft products do not contain any internal components that require user
intervention or repair. If the device shows signs of improper operation, disconnect it
immediately from its power source and contact Oceasoft technical services.
Battery warning
This product contains a lithium battery. Make sure you respect polarity
(+/-) when inserting batteries into OCEASOFT devices. Reversing
polarity by inserting the batteries incorrectly can cause the product to
heat up, and may lead to a battery liquid leak. Use only batteries
recommended by OCEASOFT. Do not change battery types, such as
such as alkaline and magnesium, or use batteries of different brands,
or even different types of batteries of the same brand. Incorrect batteries may cause
the device to heat up, and may result in a fire or battery liquid leakage. Never dispose
of batteries in fire. Do not charge regular batteries that are not specifically
rechargeable. When batteries are low, or in case the battery-operated device in
question remains unused for a lengthy period of time, remove the batteries from the
device in order to avoid any risk of battery liquid leakage. Never leave batteries within
the reach of children. In case of a battery leak, avoid all contact with the liquid present
on the batteries. Rinse with clear water immediately in case the battery liquid comes
into contact with the eyes, mouth or skin. Contact a doctor or emergency service
immediately. Battery liquid is corrosive and can damage vision, or cause blindness or
chemical burns.
FCC statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation:
FCC Part 15 §107 - §109 - §207 - §247 (Ed 2008).
Conformity with European regulations
This product has been tested by Oceasoft S.A.. The “CE” mark on
this device indicates compliance under the Radio Equipment and
Telecommunications Terminal Equipment Directive 1999/5/EC. The
following standards were applied for the evaluation of compliance with
this directive: EMC: EN 301 489-3 v1.4.1 (02); Radio: EN 300 222-2
v2.1.2 (2007-06); Safety: EN 60950-1:2006/A11:2009