Oce XDL Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 255

Oce XDL Скачать руководство пользователя страница 92

Summary of OUTPUT Command Parameters

Print Processing

84

A29247-X4-X-8-7672

STAPLE

This parameter specifies if a report should be stitched or not assumed
the printer is capable to stitch.

STOCKS

This command defines the STOCKSET and it’s associated stock(s) to
be used in a report.

UNITS

Defines the dot size of a unit used for specifying the position of a graphic
when referenced by the IMAGE parameter on the OUTPUT command
or an IMAGE, ALTER, or GRAPHIC DJDE parameter.

XMP

This parameter relates to the specific Xerox printing hardware. In the
LCDS-Module it is ignored.

Parameter

Definition(s)

Offline

Online

DJDE

BFORM=
(

form-id

[,

init

[,

copies

]]

[, (INKS
,

inkref

[,

inkref

]

[, ...])])

form-id

Specifies a one-to-six character file name (may be
numeric, alpha, or alphanumeric) which exists on
disk. This file is created by compiling a forms descrip-
tion language source file, which is called an FSL file,
with the FDL system task).
A

form-id

may be the keyword NONE.

init

If the copies parameter is not defined, the last (or
only) form specified will apply to all copies beginning
with copy number init. If the form is not the last one
specified, copies defaults to 1. If neither init nor cop-
ies are specified, the form applies to all copies of the
report. Note that init copies is only valid offline.

copies

Specifies the number of plies (passes) to which a
specified form applies.

inkref

Identifies the inks that override the corresponding
inks specified in the ink list of the form. If the form
does not contain an ink list, the form is printed in
black. If one

inkref

in the ink list is omitted, commas

must be used to maintain the relative positioning of
the remaining ink references. If more

inkrefs

are

specified than contained in the ink list of the form, the
extra

inkrefs

are ignored.

Inkrefs

may be entered as ink names or as numeric

ink indices using an inklist specified by an IDR ILIST
parameter which is referenced by an IDR parameter
in the same OUTPUT command.
Only references to primary colours are allowed.

Y

Y

Y

«
...
90
91
92
93
94
...
»

Содержание XDL
































































































































































































































































Отзывы:

Нет отзывов