manualshive.com logo in svg

Oce XDL, Справочное руководство, Страница: 161 / 255

Поделиться
Скачать
Oce XDL Скачать руководство пользователя страница 161

Using Logical Processing

RAUX Command

A29247-X4-X-8-7672

153

4.8 RAUX Command

Feeding a single sheet of paper from the auxiliary tray may be controlled from within the 
input data stream. If a data record satisfying the RAUX test criteria is found, the page on 
which the record is found is printed on a sheet of paper picked from the auxiliary tray. For 
simplex printing, the next page is printed on a sheet of paper selected from the main tray, 
unless it also contains a record satisfying the RAUX test criterion. For duplex printing, the 
need to pick a sheet from the auxiliary tray (as the result of detecting the specified RAUX 
criterion on either the front or back side of a page) is ascertained on a page-pair basis be-
fore the first side is printed. The FEED MAIN operator command should be used with this 
parameter to prevent the auxiliary tray from being automatically selected when the main 
tray is emptied.

This parameter can also be used in combination with the XDL parameter FEED of the OUT-
PUT command (refer to the chapter "Print format commands") and the FEED DJDE com-
mand (refer to the chapter "Specifying dynamic job descriptor entries (DJDEs)").

The following section describes the syntax of the command parameters and explanations 
of the parameter options.

TEST

Points to note

Note the following when using the RAUX command:

•

The RAUX command has no meaning for a continuous feed printer such as this prod-
uct. The actual logical page is moved to a front page.

•

If a record intended to satisfy the criteria for RAUX is suspended by RSUSPEND, that 
record is not checked for the RAUX criteria. Note that the RAUX criteria does not take 
effect when printing is resumed (offline only).

•

Record selection/deletion is performed prior to RAUX processing. If a record satisfying 
the RAUX test criteria was previously not selected for or deleted from printing, the 
RAUX does not function (offline only).

•

For continuous printing the system forces to a new blank page and data is positioned 
on the front side.

Parameter

Definition(s)

TEST=

test-exp

test-exp

The format and syntax of a test-exp are defined in the ”Test expression definition” 
section. If a 

test-exp

 is satisfied, a page is selected from the auxiliary tray.

There is no default.

Содержание XDL
































































































































































































































































Отзывы:

Нет отзывов