Oce TDS300, Руководство пользователя

Страница: 9 / 132

Introduction 9
The Océ TDS300 concept and components
The Océ TDS300 printer
The Océ TDS300 printer is available with an automatic 1- or 2-roll unit and
manual feed. Use manual feed when you want to print a job on a media type or
size that is not available on one of the paper rolls.
Note:
The manual feed is a special slot just above the paper drawers on the
printer. You can insert cut sheet material in this slot, one sheet at a time. Refer
to ‘Copy on pre-cut sheets’ on page 49 on how to copy on pre-cut sheets.
Note:
Only use material as specified in ‘List of available material types and
sizes’ on page 109.
The Océ TDS300 printer is a LED printer with a resolution of 600 DPI and a
printing speed of 1.8 A0 or 3 meters per minute.
You can perform a number of activities at the Océ TDS300 printer. You can set
the media type and size, stop a print job or select your preferred language from
the printer operator panel (see chapter 2, ‘Use the Océ TDS300 to print’ on
page 19 for more details).
The Océ TDS300 is delivered with drivers to enable you to print from
AutoCAD
®
, Windows
®
or Macintosh
®
applications.
The Océ TDS300 scanner
The Océ TDS300 scanner supports a wide range of copy activities. It provides
a large number of functions for defining original and copy related settings. You
can specify particular media, feeding and quality enhancement options from
the scanner operator panel. In combination with the Océ TDS300 printer it
forms a powerful productivity tool.
The scanner has different quality modes which are provided by Océ Image
Logic
®
.
■
Green key principle