background image

Copyright

© 2003 Océ-Technologies B.V. Venlo, The Netherlands 
All rights reserved. No part of this work may be reproduced, copied, adapted, 
or transmitted in any form or by any means without written permission from 
Océ. 

Océ-Technologies B.V. makes no representation or warranties with respect to 
the contents hereof and specifically disclaims any implied warranties of 
merchantability or fitness for any particular purpose. 
Further, Océ-Technologies B.V. reserves the right to revise this publication and 
to make changes from time to time in the content hereof without obligation to 
notify any person of such revision or changes.

Edition 11-2003

Océ-Technologies B.V.

US

This manual contains a functional and task oriented description of the Océ 
TDS300 multifunctional digital system release 1.0

Trademarks

Products in this manual are referred to by their trade names. In most, if not all 
cases, these designations are claimed as trademarks or registered trademarks of 
their respective companies.

Safety information

This manual contains the following safety information:

Appendix B lists ‘Instructions for safe use’. You are advised to read this 
information before you start to use the system. Appendix B includes 
technical safety information like safety data sheets.

Where applicable, cautions and warnings are used throughout this manual to 
draw your attention to safety precautions to be taken.

Internet

Check Océ on the internet at www.oce.com for:

the latest drivers

product development

Содержание TDS300





































































































































Отзывы: