Oce TCS400, Руководство по самообслуживанию

Страница: 15 / 28

Self-support tips (US) 15
What to do when you have problems with
sending print jobs
Important points for sending print jobs
Before you send print jobs to the Océ TCS400, remember the following:
■
The values defined in the Océ Settings Editor are default values for the
system. You can define a number of job settings in the printer drivers or the
job submission tools. The settings defined in the printer drivers or the job
submission tools always overrule the settings defined in the Océ Settings
Editor.
Chapter 10 of the user's manual and the on-line help in the Océ Settings
Editor include complete information about the Océ Settings Editor
■
Make sure that the media type and size defined in your job match the media
type and size defined on the printer.
■
Make sure that you define the correct print mode for your job.
■
Make sure that you define the correct media type for your job.
■
Make sure that you define the correct job settings. For example, orientation,
rotate, shift, and 'Automatic roll switch'. The section about the correct
media types for your jobs describes the job settings you can use with the
different media types and sizes.
A job submission tool, such as Océ Print Exec
®
Workgroup LT, provides you
with information about the media defined on the system. The printer drivers do
not display this type of information. If you use the printer drivers to send your
jobs, use Océ Remote Logic to view information about the media defined on
the printer in the Océ System Control Panel.
Chapter 4 of the user's manual includes more information about how to send
print jobs to the Océ TCS400.
Chapter 6 includes more information about how to define the correct media
settings for your jobs.