Oce TCS400, Руководство по самообслуживанию

Страница: 14 / 28

14 Océ TCS400 Self-support guide
What to do when the system indicates a
defective printhead
Use the Change printhead wizard to change a defective printhead
When to do
The system indicates a defective printhead. Only replace the printhead
indicated by the system.
Chapter 8 of the user's manual includes complete information about how to
replace a defective printhead.
Before you begin
During the 'Change printhead' wizard, the system performs a calibration. The
calibration is only possible on of the following media types:
■
Standard paper
■
Premium coated paper
■
Bond
■
Coated bond
■
Matte photo paper
■
High gloss photo paper
■
Deluxe bond.
How to initialize the Change printhead wizard
Attention:
Only open the top cover when the wizard prompts you.
1
Press the on-line / off-line key (key 4 on the folded cover) to set the printer
off-line.
2
Press the lower softkey for 'Change printhead' (key 6 on the folded cover) to
enter the wizard.
3
Follow the steps of the wizard.
4
At the end of the wizard, the printer calibrates.
When the calibration is completed, the screen displays the calibration status.