Oce TCS400, Руководство пользователя

Страница: 69 / 321

Make copy jobs on the Océ TCS400 69
6
Use the 'Selection type' setting to define the following
■
'Delete area'
Delete the selected area from your output.
The area is grayed out on the output.
■
'Keep area'
Keep the selected area but delete the area that was not selected.
The complete image on the output is grayed out, except the selected area.
■
'Off'
The 'Area selection' setting is not active.
7
Use the settings 'Horizontal offset' and 'Vertical offset' to define the location of
the area.
8
Use the settings 'Width' and 'Length' to define the size of the area.
Note:
Turn the original face up to measure the offset and the size of the area.
9
Use the softkey for 'Back' to return to the 'Original' card.