Oce PP20D Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 98

background image

i

Caution

NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION.

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER’S EMULATION MODE. The printer is factory-set to
emulate the PCL. The emulation mode can be changed by following the procedures described in

Chapter 1

.

Notice

The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. The user
is asked to excuse any technical inaccuracies or typographical errors in the present edition.

No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No responsibility is assumed
for defects in the printer’s firmware (contents of its read-only memory).

This manual, any copyrightable subject matter sold or provided with or in connection with the sale of the page printer, are protected by
copyright. All rights are reserved. Copying or other reproduction of all or part of this manual, any copyrightable subject matter without
the prior written consent of Kyocera Mita Corporation is prohibited. Any copies made of all or part of this manual, any copyrightable
subject must contain the same copyright notice as the material from which the copying is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL and KIR (Kyocera Image Refinement) are trademarks of
Kyocera Corporation.

Diablo 630 is a product of Xerox Corporation. IBM Proprinter X24E is a product of International Business Machines Corporation. Epson
LQ-850 is a product of Seiko Epson Corporation.

Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-Packard Company. Centronics is a trade name of Centronics
Data Computer Corp. PostScript is a registered trademark of Adobe Systems Incorporated. Macintosh is a registered trademark of
Apple computer, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. PowerPC is a trade-
mark of International Business Machines Corporation. E

NERGY

S

TAR

is a U.S. registered mark. All other brand and product names

are registered trademarks or trademarks of their respective companies.

This Kyocera Mita page printer uses PeerlessPrintXL to provide the HP LaserJet compatible PCL6 language emulation. Peer-
lessPrintXL is a trademark of The Peerless Group, Redondo Beach, CA 90278, U.S.A.

This product was developed using the Tornado™ Real Time Operating System and Tools from Wind River Systems.

This product contains UFST

™

and MicroType

®

from Agfa Corporation.

©2003 by KYOCERA MITA CORPORATION All rights reserved. Revision 1.2., September 2003

«
1
2
3
4
...
»

Содержание PP20D



































































































Отзывы:

Нет отзывов

Похожие инструкции для PP20D

Figure 4 Standalone

Бренд: 3D Systems Страницы: 2

Бренд: IBM Страницы: 334

Бренд: IBM Страницы: 428

Бренд: IBM Страницы: 316

Бренд: IBM Страницы: 210

VersaLink C400V

Бренд: Xerox Страницы: 196

Бренд: Flashforge Страницы: 36

Бренд: Intermec Страницы: 38

Bravo se Disc Publisher

Бренд: Primera Страницы: 58

Бренд: SPRT Страницы: 14

WorkCentre Pro 421

Бренд: Xerox Страницы: 162

Бренд: VASTEX Страницы: 8

Бренд: Brady Страницы: 48

Бренд: Gestetner Страницы: 4

Бренд: Kyocera Mita Страницы: 14

Бренд: Copystar Страницы: 2

Бренд: Opt Lasers Страницы: 69

ECOSYS FS-C2526MFP

Бренд: Kyocera Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды