Oce PP20D, Руководство по эксплуатации

Страница: 15 / 98

Operator Panel
1-5
1 — Software Version
This information shows the software (firmware) version and date of issue
of the printer.
2 — Hardware Information
This information shows the currently selected paper source (indicated by
an asterisk), paper size, and various other printer settings.
3 — Page Information
This information shows the currently selected resolution, number of copies
printed to date, and the total page count.
4 — Network Status
This shows the IP address, subnet mask address, default gateway address
and other settings for the network interface card installed in the printer.
5 — Memory
This information shows the amount of total memory installed in the
printer, the amount of currently available memory, and the current status
of the RAM disk.
6 — Installation Options
This shows the option(s) currently installed in the printer.
7 — Emulation
This shows all available emulations and the currently selected emulation
(marked with an asterisk). The printer is shipped from the factory with
PCL 6 emulation selected.
8 — Error Log
This shows the last three instances of the following six types of errors,
listed in order of occurrence:
KPDL Error Press GO
;
Memory overflow
Press GO
;
Print overrun Press GO
;
File not found Press GO
;
MemoryCard err Press GO
;
RAM disk error Press GO
. (These are
displayed on the computer screen when using KM-NET for Clients .)
The most recent error is displayed on the top line of the Error Log. For
error remedies, see Chapter 3 . Error information is cleared when the
printer’s power is turned off.
9 — Toner Gauge
This shows the approximate level of remaining toner. When the value is
100, the toner container is full. The closer to 0, the smaller the amount of
remaining toner.