Oce Perfect Binder-C1, Руководство пользователя

Страница: 32 / 82

Finished sizes of booklets
Introduction
This machine can bind various sizes of booklets.
The sizes of the finished booklets differ according to the cutting method. The following
table shows relations between sizes of the finished booklets and sizes of cover and body
pages / slip sheets.
Be sure to confirm the cutting range is within the available ranges shown below.
Top/bottom cutting range is the total of top cutting range and bottom cutting range.
therefore, half the value of top/bottom cutting range is equal to each value of the top
range and the bottom range.
Top/bottom cutting range (C1): 13 to 79 mm (0.52" to 3.11")
Foredge cutting range (C2): 6.5 to 49.5 mm (0.26" to 1.94")
Booklet thickness (D): less than 25 mm (1")
Caution:
Be sure to use paper that is less than 297 mm (11.69") wide when cutting in one direction
or when not cutting.
Caution:
The edges of bound booklets may be folded when binding booklets with covers that are
larger than the body pages if cutting is not done.
Caution:
Use body pages and slip sheets that are the same size.
Caution:
The top/bottom cutting range of this machine is 13 to 79 mm (0.52" to 3.11"), and the
foredge cutting range is 6.5 to 49.5 mm (0.26" to 1.94") ( (you can also /- 1 mm
(0.04") for the top/bottom, and +/- 0.5 mm (0.02") for the foredge by finishing size fine
adjustment). If the finished sizes of booklets set on the printer or printer driver go over
the cutting range of this machine, the cutting will not operate correctly. Be sure to adjust
the printer's cutting range within the available value of this machine.
Chapter 4 - Basic operations 32
Finished sizes of booklets