44
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 7.
1
Make sure that the Network board is
installed into the machine. (See "Optional
accessories" in Chapter 23 of the User's
Guide.)
2
Switch off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
3
Turn on your Macintosh
®
.
4
Insert the supplied CD-ROM into your CD-
ROM drive.
5
Double-click the
Start Here OS X
folder to
install the printer driver. (Scanning is not
supported in OS X 10.1.)
6
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
7
Turn on the machine by plugging in the
power cord. Turn the power switch on.
8
Select
Applications
from the
Go
menu.
For Network Interface Cable Users
For Mac OS
®
X 10.1/10.2.1 or greater
Step 2
