manualshive.com logo in svg

Oce im3512, Руководство по эксплуатации, Страница: 66 / 196

Поделиться
Скачать
Oce im3512 Скачать руководство пользователя страница 66

FINISHER

3-8

Finisher functions

■

Sort mode

Sorted sets will be delivered.

■

Offset mode

■

Group mode

Groups of prints or copies of the same page will be
delivered.

Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.

■

Staple sort mode

Collated sets will be stapled and delivered to the offset tray. The stapling positions, orientation, paper size for
stapling, and stapling capacity are shown below.

Original

Printouts

Offset mode

N

on-offset mode

Original

Printouts

Stapling positions

Top left corner of 
printouts

Center left two 
positions of printouts

Lower left corner 
of printouts

Portrait orientation

Landscape orientation

Available paper sizes: 8-1/2" 
x 11", A4 and B5
Stapling capacity: Up to 30 
sheets for any available sizes

Same as above  

Same as above  

Stapling cannot be made.

NOTES

●

Stapling can only be done when the offset tray has been selected.

●

If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.

NOTE

Transparency film heavy paper, punched paper, labels , envelopes and postcards cannot be stapled.

Copy_SEC.book  8 ページ  ２００７年９月１２日　水曜日　午後１時３３分

Содержание im3512





































































































































































































Отзывы:

Нет отзывов