Oce DFS10 Скачать руководство пользователя страница 32

Страница: 32 / 90

Making the books

Cover Tray currently in use empties

When the Cover Tray currently in use empties, the following
will occur:

• The Sound Tone, if enabled, will beep twice.

• The Message Display on the Control Panel of the DFS10

will advise you to

”Add Covers to Tray X”

(if you have

selected Cover Tray 1 and Cover Tray 2) or

”Check

Cover Supply in Tray X”

(if you have selected Cover

Tray 1 or Cover Tray 2).

• The green light to the left of the Cover Tray selection on

the Control Panel of the DFS10 will flash.

• The Cover Tray light on the Mimic Display will go on.

• The Cover Tray will automatically unlock and the green

Ready to Open indicator light will go on.

• The Supply Level indicator lights on the Cover Tray will

go out.

• The DFS10 will stop accepting copy sets, but will continue

processing the books already in progress.

Cover Tray not currently in use is empty

When the Cover Tray not currently in use is empty, the
following will occur:

• The Message Display on the Control Panel of the DFS10

will advise you to

”Add Covers to Tray X”

(if you have

selected Cover Tray 1 and Cover Tray 2) or

”Check

Cover Supply in Tray X”

(if you have selected Cover

Tray 1 or Cover Tray 2).

• The Cover Tray light on the Mimic Display will stay on.

• The Cover Tray will remain unlocked and the green Ready

to Open indicator light will stay on.

• The Supply Level indicator lights will remain unlit.

Содержание DFS10


























































































Результаты поиска

Содержание DFS10

Отзывы:

Похожие инструкции для DFS10

Бренды по названию

Популярные бренды

Oce DFS10, Руководство оператора

Результаты поиска

Содержание DFS10

Отзывы:

Похожие инструкции для DFS10

Бренды по названию

Популярные бренды