Oce CS665 Pro, Руководство пользователя

Страница: 115 / 495

4 Supplies & handling
4-10 CS665 Pro
To make fine adjustment of tray 5 paper guides
Printed image may be dislocated if the paper guides are not aligned closely to the paper loaded in the tray.
Adjust the position of paper guides correctly according to the following procedure.
1
Withdraw the tray to be adjusted, then place a sheet of paper
to be loaded in that tray.
2
Turn the bottom plate lock release knob counterclockwise to
loosen it, slide it to the rear side, then turn it clockwise to fix it
in position.
3
Return the tray to its original position, then withdraw it again after the tray bottom plate goes up
completely.
– The bottom plate of the tray automatically goes up when returned in position.
– When that automation is completed, the paper amount indicator on the Machine Status Screen and
Copy Screen changes to
.
Withdrawing the tray at this point, you will find that t he bottom plate has been elevated to the top
position.
4
Align paper guides to the sheet.
– Turn the four paper guide knobs counterclockwise to
loosen them.
– Pushing the paper guide lock release lever, move the
lateral guides along the sheet.
Do not press the guides to the sheet strongly; otherwise
paper mishandle may be caused.
5
Fix paper guides position.
– Turn the paper guide knobs (two for each) clockwise to fix
the guides.
– Check the two scales between paper guide knobs, then
confirm that they reach the same value.
If not, readjust paper guides.