Oce CS665 Pro, Руководство пользователя

Страница: 111 / 495

4 Supplies & handling
4-6 CS665 Pro
To load paper in bypass tray
0 When using the bypass tray, specify the paper type to be loaded on the tray at the same time. See
page 9-33 for details.
0 Do not use paper with staples or paper that conducts electricity (silver, carbon, etc.), otherwise an
accident may occur as a result of fire.
0 To avoid machine trouble, do not use coated paper as follows:
Heat-sensitive paper, silver-coated or carbon-backed paper, OHP transparencies, ink-jet printer paper
1
Open the bypass tray located on the right side of the machine.
2
Load copy paper, and adjust the paper guides to the paper
size.
– Do not load more than 250 sheets (80 g/m
2
) or above the
limit indicated on the paper guides, otherwise paper
misfeed may be caused.
The indicator on the Machine Status Screen and Copy
Screen will change to .
3
When copying is completed, close the bypass tray.
To load paper in paper feeder unit trays (tray 4 and 5)
0 Be sure that the machine is powered ON before withdrawing the tray.
0 Only one tray can be withdrawn at a time.
0 Procedure to make fine adjustment of tray 5 paper guides is explained in another page. See page 4-10.
1
Withdraw the tray to be supplied with paper.
– To load the same size as loaded before, proceed to step 4.
2
Loosen the paper guide knobs.
– Turn the four paper guide knobs counterclockwise to
loosen them.