Oce CS665 Pro, Копирование операций

Страница: 423 / 493

CS665 Pro 12-41
Output applications 12
8
Specify the cover trimming setting.
– Touch [On] to trim the cover, or [No] to deactivate this function.
If the trimming width estimated by the machine does not fall within the range from 3 to 40 mm, a
message will be displayed to inform you that the trimming mode is unavailable. In this case, adjust
the cover or spine width to enable this setting.
If the estimated amount exceeds 10 mm, perfect binder will automatically trim the cover whether
this function is activated or not.
9
Make fine adjustments for the lead edge, trimming width, and image position of the cover.
– Touch Fine Adjustment to display the Fine Adjustment Screen.
– To adjust the lead edge of the cover, touch [Cover Lead Edge Adj.]
Touch the positive/negative selection key to select positive or negative of the adjustment value, then
use the screen keypad, upper/lower arrow keys, or the control panel keypad to enter the desired
value.
– To adjust the trimming width, touch [Cover Trimming Adj.]
Touch the positive/negative selection key to select positive or negative of the adjustment value, then
use the screen keypad, upper/lower arrow keys, or the control panel keypad to enter the desired
value.
– To adjust the image position of the cover, touch [Cover Image Shift Adj.]
Touch [Front] or [Back] to select the printed side, then [Up/Down] or [Right/Left] to select the
direction to be adjusted.
Touch the positive/negative selection key to select positive or negative of the adjustment value, then
use the screen keypad, upper/lower arrow keys, or the control panel keypad to enter the desired
value.
– Touch [OK] to complete the setting.
10
Touch [OK] to return to the Copy Screen.
11
Select additional copy conditions, as desired.
– When making double-sided copies, select [1-2] or [2-2].
– If the original count exceeds 100, use Memory Scan mode.