Oce CS665 Pro, Копирование операций

Страница: 417 / 493

CS665 Pro 12-35
Output applications 12
1
Position the original.
– For the original available in perfect binding, see illustrations on page 12-28.
2
Load paper for body sets and covers in each tray to be used.
– Load paper for body sets in one of the tray 1 to 5.
When printing on covers, also load cover sheets in one of the tray 1 to 5.
– If cover print is not required, load cover sheets in one of the tray 1 to 5, cover feeding tray of perfect
binder, or upper/lower tray of post inserter on folding unit.
– Custom paper size is to be used as cover. Be sure to check the precise dimensions in order to
specify them during this procedure.
If Cover Trimming is desired, be sure to use the size that secures 3 mm to 40 mm of trimming width.
3
Touch [COPY] tab to display the Copy Screen, select the tray loaded with paper for body sets, and
change the paper setting as required.
– The paper size will be detected automatically.
If paper weight specified for the tray loaded with paper for body sets is inadequate, the binding
operation cannot be performed. Select one from [64-74 g/m
2
], [75-80 g/m
2
], and [81-105 g/m
2
].
– The binding operation may not be performed even if the paper weight mentioned above is specified.
For details, see the User’s guide – POD Administrator’s reference.
The number of body set may be limited depending on the selected paper weight. For details, see
the User’s guide – POD Administrator’s reference.