Oce CS520, Руководство пользователя

Страница: 452 / 472

[21] Execute Adjustment Operation
14-452
[21] Execute Adjustment Operation
Select the desired item to execute an adjustment operation.
Automatic gamma adjustment should be performed if reproducibility of the whole
image is not satisfactory.
Colour Regist auto adjustment should be performed if CMY colour layers show any
gap compared with the original during successive copying.
Toner refresh mode should be performed if you find the following conditions:
- Printed image shows a rough texture.
- Small dots appear randomly on the printed paper.
- Small white spot appears in the printed image.
Belt refresh mode should be performed if white lines appear along with the paper
feeding direction at the same position in all CMYK colour layers.
Procedure
1
Touch [21] Execute adjust operation on the Key Operator Mode Screen to
display the Execute Adjustment Operation Screen.
2
Touch the desired item key to highlight it.
3
Touch OK to complete the setting and restore the Key Operator Mode Screen.
4
Touch PREVIOUS SCREEN to restore the Basic Screen. The machine will
execute the adjustment operation of the selected item automatically, with the
executing adjustment message displayed in the message area (approx. 2’ 30”).
5
When the adjustment is completed, “Position original in the RADF face up”
message will be displayed on the Basic Screen.
Execute Adjustment Operation Screen Key Operator Mode Screen