Oce CS520, Руководство пользователя

Страница: 116 / 472

Output Mode for Machine with Finisher
3-116
Output Mode for Machine with Finisher
Finisher FS-513/FS-606 is equipped with a primary (main) and a secondary (sub)
exit trays. Without using any optional equipment, each exit tray provides the output
modes as described below.
When the Memory switch No. 58 "Finisher operating (Thick)" of the Key
Operator mode is set to prefer image quality, copy speed may become
maximum one-sixth lower depending upon the paper type or specified output
mode. For more detailed information, contact your service representative.
Primay (Main) Tray:
Using Face up mode in combination with the above four modes, simplex copies
exit face up on the exit tray.
1 Non-sort mode
simply means that the offset-stacker finisher modes are
not selected. Copies will be stacked upon exit without being offset by
sorted sets.
2 Sort mode
outputs multiple copies of the original set, having each sorted
set offset by 30mm upon exit.
3 Staple mode offsets and staples each sorted set. Up to 50 sheets (or within
5mm thick) can be stapled.
4 Group mode groups together multiple copies of each original and offsets
the sets by 30mm upon exit.
Non-sort
Sort Staple-sort
Group
Offset by 30mm 1 oblique
staple
Offset by 30mm
Example:
Make 3 copied sets
from 4 original sheets