Oce CS520, Руководство пользователя

Страница: 307 / 472

11-307
Inserting Images into Printed Sets (Image Insert)
Touch Booklet on the Image Insertion No. Setting Screen to use this
function.
4. When all page number entries are made, touch OK .
The Application Selection Screen will be restored.
5. Touch
OK
on the Application Selection Screen.
The Basic Screen will be restored.
The
STORE
key on the Basic Screen appears highlighted to show that the
Store mode is automatically selected.
6. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
7. Scan the document feeder images:
Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not exceeding
100 sheets and load them from the block with the first page.
8. Press [ START ].
The originals positioned in the document feeder will be scanned into memory.
9. Scan the platen glass images.
Open the document feeder.
Position an original FACE DOWN on the platen glass, then close the document
feeder.
PLACE AND SCAN THE ORIGINALS IN ORDER.
10. Press [
START
].
11. Repeat steps
9
and
10
for all originals.
• Memory overflow may occur during scanning. See p. 5-157.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in your
machine.
12. Touch
STORE
to exit the Store mode.
13. Press [
START
].
The copier will start printing when ready for output.