Oce CS 5070, Руководство пользователя

Страница: 94 / 139

94 Océ CS 5050/5070 User Manual
Note:
For severely clogged cartridges, completely clean the jet plate
thoroughly by immersing the cartridge jet plate into the ultrasonic cleaner
for 30-40 seconds. As a final attempt, try immersing the jet plate into
boiling water for 10-15 seconds.
5
After cleaning, reinstall the cartridge.
6
Select
Utility Menu
/
Service Menu
/
Diagnostics
/
Colour Test
to clear
water/chemicals from the jets.
7
Press
Prev. Option
to change the option ‘10 %’ to ‘100 %’.
8
Press
OK
to start printing.
9
Rerun the prime pattern to verify whether the jet is cleared of ink clog.
Try to eliminate all gaps in the “stair step” pattern prior to starting your print
job.
If the printed results remain unsatisfactory, run the test several more times.
Compensating manually for clogged jets
In addition to the prime pattern, you can also print a jet status list which
identifies the number of individual clogged jets for each colour. This enables
you to manually enter the jet numbers (by cartridge colour) to initiate
compensation for the clogged jets. The jet compensation data is stored on the
cartridge chip.
▼ ▼ ▼ ▼
To print the manual jet compensation list
1
From the main menu, select
Utility Menu
/
Service Menu
/
Calibration Menu
.
2
Select
Open Jet Menu
/
Print Jet list
. In the example below, the jet status list
shows the current jet compensation by number for each cartridge.
Manual jet compensation list
Y: None
M: 1, 3, 10
C: None
K: 10, 21, 30, 128