Oce COLOR SYSTEM 110, Быстрый индекс

Страница: 123 / 149

4-2
References
Message Cause and Countermeasure Refer To
Add fixing oil.
Add yellow toner.
Adjusting...
Best size LTR is not loaded.
Cannot staple this many sheets.
Check the Rotary Changer.
Check the stapler unit.
Cleaning the feeder...
Cleaning the wires...
Cleaning web needs to be
replaced.
Close the Buffer Pass Unit front
cover.
Close the front doors.
Close the left (right) feeder cover.
Close the left side door.
Close the right side door.
Close the Stapler Sorter front cover.
Dispose of the waste toner.
Refill with fixing unit oil.
Supply toner of the indicated color.
The machine is making automatic adjustments.
Wait until the adjustments are complete, and
the copy job is automatically resumed.
The indicated copy paper best for the current
copy settings is not loaded. Load the best
size of paper or select another size of paper.
The number of copies exceeds the maximum
for stapling. Up to 30 sheets (20-lb bond or
80.0 g/m
2 ) can be stapled together.
Re-attach the Rotary Changer properly to the
Film Projector. If this message is displayed
when the Rotary Changer is attached
properly, contact your service representative.
The stapler unit does not work properly.
Check for a staple jam or other trouble. If the
stapler unit does not recover, contact your
service representative.
The Feeder cleaning is now in progress.
Wait for a short while.
The wire Cleaning is now in progress.
Wait for a short while.
There is only a little cleaning web remaining.
Contact your service representative. The
copier can continue to make copies for a
while.
The Buffer Pass Unit front cover is left open.
Close the cover.
The front doors are left open. Close the
doors.
The right or left feeder cover is left open.
Close the cover.
The left side door is left open. Close the
door.
The right side door is left open. Close the
door.
The Stapler Sorter front cover is left open.
Close the cover.
The waste toner container is full. Replace
with a new one.
4-54
The following shows the messages that appear on the Touch Panel Display of the CS110
and CS115. It also briefly describes their causes and countermeasures. If you need a
detailed explanation, refer to the page indicated in the Refer To column.
4-85
2-26
2-8
2-13
4-40
13-67
2-11
13-64