Oce cm4521, Руководство пользователя

Страница: 208 / 428

Setting up the PostScript driver (Windows) 6
cm4521 6-23
Specifying the center staple and fold setting
You can specify to center staple and fold a printed document. By specifying
the center staple and fold setting, printed documents can be folded in half
and stapled.
2
Reminder
The center staple and fold function is available only when optional saddle
stitcher is installed.
1
Click the Finish tab.
2
Select the “Center Staple and Fold” check box.
2
Note
The center staple and fold function cannot be specified when the staple,
punch, or fold function is specified.
Hole punching
Holes can be punched into the printed document.
2
Reminder
The hole punch function is available only when the punch kit is installed
on the optional finisher.
1
Click the Finish tab.
2
Select the “Punch” check box.
3
From the drop-down list, specify the number of punched holes.
2
Note
The hole-punch position changes according to the binding position spec-
ified from “Binding Position”.