Oce Booklet Trimmer-D1, Руководство пользователя

Страница: 35 / 42

Solution Cause of error
• Open the front cover (1) and the
transport belt unit B.
• Remove the jammed booklet.
• Place the transport belt unit B back
to resume printing.
A booklet jam has occurred in section TB.
• Lift handle E and remove the
jammed booklet.
• Open the delivery section cover (2).
• Open the A transport belt unit.
• Remove the jammed booklet.
• Close transport belt unit A.
• Close the delivery section cover (2) to
resume printing.
A booklet jam has occurred in section TA.
Trimming waste exits at the delivery sec-
tion.
* If the operator panel displays an error message while the conveyor is not full, then trim
waste may block the sensor.
Chapter 4 - Troubleshooting 35
Overview of possible errors