Oce Arizona 180 GL, Руководство пользователя

Страница: 42 / 268

Operator Interface Hardware
Introduction
The Operator interacts with printer components to print, maintain, and monitor the
state of the printer. This section identifies and explains the functions of the hardware.
[43] Printer Hardware
Operator Interface Components
Hardware Interface Components
#
Function Component
Turns the printer On and Off. 1) Main Power
Switch
Consists of a podium stand, an LCD display monitor, a
mouse, and an emergency stop button. The printer control
software is displayed here. 2) Operator Control
Station
Three vacuum zone control handles determine which of the
three print zones on the printer table will be active when the
vacuum pump is switched on. 3) Vacuum Zone
Control
Toggles the pump to turn the table vacuum on/off. Vacuum
must be on prior to starting a print. 4) Vacuum Table
Foot Switch
Adjusts the level of vacuum suction applied to the media. Less
vacuum reduces artifacts caused by suction when imaging on
flexible media. 5) Vacuum Bleed
Valve
Starts the print job. 6) Print Button
Chapter 4 - How to Navigate the User Interface 42
Operator Interface Hardware