Oce 9400-II, Руководство пользователя

Страница: 87 / 167

Customizing the printer 87
HP-GL/2
HP-GL/2 print origin
The starting position of the print on the paper depends on the print origin. You
can choose between: upper right, upper left, center, lower right and lower left.
Default is Lower right.
▼ ▼ ▼ ▼
Defining the HP-GL/2 print origin
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL
/2
SETUP
’ menu.
8
Select the ‘
ORIGIN
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
ORIGIN
’ menu.
10
Select the required origin item using the or button.
11
Press ‘next/select’ to confirm the selected origin.
12
Press ‘Program’ to leave the main menu.
HP-GL/2 page advance
In HP-GL the SP0 command can be interpreted in two ways, depending on the
printer being emulated.
If ‘
PAGE ADVANCE
’ is set to yes, the printer responds to the HP-GL instruction
SP0 as an indication of end of print.
If ‘
PAGE ADVANCE
’ is set to no, the printer responds to the HP-GL instruction
SP0 as select pen zero. Any vectors following the SP0 will be printed with the
defined pen attributes (width and pattern). Default is No. Also refer to
‘Defining pen settings’ on page 80.