Oce 9400-II, Руководство пользователя

Страница: 103 / 167

Advanced printer menu functions 103
Selecting the media saver
The Océ 9400-II offers two options for optimizing media usage for printing:
Nesting and Autoposition. This applies for vector and raster formats. The
media saver can also be set off.
Media saver is flushed:
■
after a time out
■
when a copy job is interrupting the printing process
■
when selecting another roll or manual feed
■
by the flush media saver on the printer operating panel.
Note:
When automatic roll selection is used, the media saver is not active.
To use the media saver the following conditions must be set:
■
cut methods = synchro
■
center = off
■
leading- and trailing edge = 0.
Nesting
When nesting is selected, prints are stored in queues in the printer’s memory,
according to their size: A4 or A, A3 or B, A2 or C and mixed A4/A3. When
the queue is full, the drawings are printed across the full width of the media.
The minimum paper length is 420 mm, so when printing A3 landscape or A4,
an extra white strip of paper appears at the end.
If the print is larger than A2 or C size it will not be stored in a queue, but will
be printed normally. If prints are not standard ISO, ANSI or Architecture sizes,
the next larger format will be used (see figure 29 on page 104).
▼
▼ ▼
▼
Selecting nesting
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
PLOT MANAGER
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
PLOT MANAGER
’ menu.
6
Select the ‘
MEDIA SAVER
’ item using the or button.