Oce 9400-II, Руководство пользователя

Страница: 127 / 167

Solving problems 127
3
Remove the original.
4
Lower the top cover.
5
Lock the cover by pushing the front side of the cover down and pushing it back
to the rear until you hear a click.
Note:
Make sure that the cover is closed correctly, to ensure proper original
transport.
6
Press the ‘stop/correction’ button. The error message will disappear on the
panel.
Cleaning the glass platen
If the glass platen is dirty or static it should be cleaned to ensure top quality
copies. At the same time you can clean the white pressure platen
Attention:
To achieve the best results, we recommend the use of Océ
cleaner ‘A’. (Codenr. 1068117; Cleaner kit).
▼ ▼ ▼ ▼
Cleaning the glass platen and the pressure platen
1
Switch off the scanner.
2
Unlock the top cover by pushing the front side of the cover down and pulling
it towards.
3
Raise the cover (see figure 37).
4
Clean the glass platen and the white pressure platen gently with a soft cloth
moistened with a small quantity “Cleaner A” (see figure 38).
For safety information see the safety data sheet in Appendix B.
[38] Cleaning the glass and the pressure platen