Version 5.2_2022 (January 26, 2022)
16
! CAUTION:
When checking the functioning of protections by disconnecting connections on the terminal
strip, make sure that they are reconnected in the original manner, and that all connections are
firm.
6.1.
Damaged or missing pictograms
The Aqua Cool is equipped with the following pictograms as standard:
- Control panel location
- Watch out for rotating parts
- Secure before opening
- OC Verhulst model plate
Missing or damaged pictograms should be (re)affixed as follows.
When affixing pictograms, proceed as follows:
•
Clean the surface with a non-aggressive degreaser.
•
Heat this section with a hairdryer until it is hand-warm.
•
Remove the protective sheet and stick the pictogram in the correct position.
•
Press the pictogram firmly and make sure that no air bubbles form underneath.
After application, allow the adhesive layer to cure for 24 hours before bringing the pictogram into contact with
water and/or cleaning agents.
High Voltage
Rotating Parts