Transmitter/receiver card part number 113749B inside each high intensity power
supply and
the
controller
P/N 113625L at the bottom
1. Configuration of the card :
The same card is inside each lamp and inside the controller. So it can be configured as:
-
transmitter (pin 2 of dip-switch S1 at ON) when installed inside each lamp
or
- receiver (pin 2 of dip-switch S1 at OFF) when installed inside the controller.
After changing the configuration of S1 or S2, the card has to be reset (or switch off and on)
2. Indicators D1 and D2 when the card is in transmitter or receiver mode:
2.1
In transmitter mode
- The led D1 is on in case a default is signaled in the entry.
- The led D2 is on when the card is transmitting.
- In reset mode, the 2 leds are simultaneously on.
2.2
In receiver mode
- The led D1 is on when the number of default lights is above the limit (the relay is then de-
activated – alarm is signaled).
- The led D2 is on when the card is receiving.
- In reset mode, the 2 leds are simultaneously on.
Содержание OFP-CAB-8E-RW-240-HIA
