OBSIDIAN CONTROL SYSTEMS Netron RDM10, Руководство пользователя

Страница: 21 / 42

21
MENU: SYSTEM
This menu contains all the settings to configure and manage the
device.
SUB MENU OPTIONS / VALUES Description
De
vi
ce
Na
m
e
12 Character Label (i.e. NETRON
RDM10)
Set a device name
De
vi
ce
ID
0 – 999 Set an optional device ID
Di
sp
la
y
Display Timeout
Disable Display stays on indefinitely
10s, 30s, 1m, 5m,
10m
Display goes dark after this time
Screen Brightness 1-10 Adjust the brightness of the internal display
LED Brightness 0-10
Adjust the brightness of the front LEDs. Set to 0 to disable
them.
Home Screen
Device Info The display shows port and connectivity information
Cue Browser
The display shows a list of stored cues which can easily be
browsed and started by the encoder wheel
Ar
t-
Ne
t
Of
fs
et
Universe 1: 0-0
Universe 1: 0-1
Lock
D
ev
ice
PIN: 000 (
000
)
Lock
Disable The device does not require a pin
Timeout The device asks for a pin after the display times out
Manual
Lock:
000
(
000
)
Lock /
Unlock
Lock the device immediately
St
ar
tu
p
Cue Run a specific Cue at startup
Wait for Data
No DMX is sent until valid data is received for the ports. The
last incoming values continue to be sent on the ports until
the time is expired. Once timeout has completed the device
will perform one of the below actions
Si
gn
al
L
os
s
Hold Last Look
Forever , 0s, 10s,
30s, 1m, 5m, 10m,
60m
The last incoming values continue to be sent on the ports
until the time is expired. Once timeout has completed the
device will perform one of the below actions.
Fade to 0 0-60s (30s) Crossfade to DMX 0. Set to 0s for instant out.
Cue 1-99 Start Cue X
Disable DMX DMX traffic is turned off on all ports
Ba
ck
up
Co
nf
ig
Save Config
Config Saved Save current configuration including all cue data
Load Config Config Loaded
Reload configuration. Backups can be exported and
imported from the web interface
RDM
Pr
oc
es
si
ng
All Disable
Disables RDM processing on the device
All Enable Enables all RDM processing on the device
Fact
or
y
Re
se
t
Pin: 000 ( 011 ) Confirm
Device will
be reset to
factory
defaults.
Yes/
No
Reset the device to factory default. It will reload NETRON
Preset 1. All cues are deleted, and all settings are set to
default.