Observint The BLACK Line BLK-PTZ36X, Руководство пользователя

Страница: 42 / 56

34
SECTION 4: USING THE OSD MENUS
c. Click the left/right direction buttons to position the cursor to PRESET, DWELL TIME and SPEED of a preset. Click the up
and down direction buttons to set each value.
—
The preset you select for the patrol should be a defined preset.
—
The dwell time is the time the camera will pause on a preset.
—
The speed of the patrol is the speed the camera will switch between presets.
3. Follow above steps to define other presets for the selected patrol. You can configure up to 32 presets in sequence for a patrol.
Click
IRIS+
to save the current settings, or click
IRIS-
to cancel and return to the previous menu.
4.6.2 TASK 2: Preview the patrol
Move the cursor to
<PREVIEW PATROL>
, then click
IRIS+
to preview the current patrol and enable the camera to scan among
the presets.
4.6.3 TASK 3: Delete a patrol
You can move the cursor to
<DELE PATROL>
, then click
IRIS+
to delete the current patrol.
4.6.4 TASK 4: Call the defined patrol
To call a patrol, use a web browser connected to your DVR to select the corresponding preset number from the drop-down list in
the control panel, then click the icon to call the related patrol. For example, you might call preset 35 to call patrol 1. Refer to “4.6
Configuring Patrols” on page 33 for more information.
4.7 Configuring Patterns
A pattern is a repeatable series of panning, tilting, zooming and preset movements that can be recalled by a command or
automatically performed by a configured function (alarm, park, time task, and power-up).
4.7.1 TASK 1: Set a pattern
You can configure up to 4 patterns. To set a pattern:
1. Open the PATTERNS submenu. Go to MAIN MENUS g DOME SETUP g PATTERN SETUP