Observator OMC-160-3, Руководство пользователя

Страница: 22 / 25

OMC-160-3
Manual Page 22
10 Handling, transportation and storage
10.1 Handling
Keep the instrument in the protective Styrofoam package until installation. Care should be taken not to
damage the cup unit the vane unit. Take care that the small mounting materials will not be lost.
Once the installed, store the packing for later use (see section 10.3)
10.2 Long term storage
When not in use, store the OMC-160 anemometer in a dry place. Note that this is required, as the system
is only weatherproof when mounted in an upright position.
10.3 Reshipping the instrument
Whenever the OMC-160-3 anemometer is shipped, e.g. for calibration or repair, it should be shipped in
the original Styrofoam packing. If this is no longer available on site, replacement packing can be ordered
from Observator Instruments or one of their world-wide agents or resellers. For contact information
please refer to section 9.
If the anemometer is shipped for calibration, please also include the vane unit and cup units, as those
parts are required during calibration.