Observator Instruments OMC-042 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 106

background image

OMC-042 / 043 / 044 Data loggers

Users

’ manual

page 80

Firmware Upgrade

The data logger is equipped with a boot loader, which enables the firmware upgrade feature.
Firmware upgrading allows a user to overwrite the internal firmware of the data logger with a (newer)
updated version of the firmware. Firmware upgrading can be done by using:

-

USB connection

-

Wireless via 2G/3G

-

Via Comport

When to use Firmware upgrades

Normally, a user never uses this feature, as long as he is satisfied with the performance of the system.
In time however, the need for additional features may arise. For example, a new serial sensor is introduced
on the market and a customer wants to connect this sensor to the data logger. When Observator
Instruments has extended the firmware to support that sensor, a new version of the firmware is released.
After the user has performed the firmware upgrade, his “old” data logger, now supports the new sensor.
Normally, when the system is running fine, and no additional requests exists, we recommend NOT to
perform a firmware-upgrade.

Firmware upgrade procedure

How to perform a firmware upgrade:

-

First download the latest version of the firmware from

http://www.observator.com

-

Download the OMC-terminal Terminal setup from

http://www.observator.com

-

Use the menu and select the option “Maintenance”.

-

Follow instructions from the menu.

-

Use “Y-Modem protocol” to send the new firmware to the data logger.

-

D

on’t remove the USB nor power from the data logger

-

When these steps are completed, the new firmware is active.

We recommend the use of the USB-connection over the wireless function. This is because of possible drop
outs in communication. When a firmware upgrade procedure is interrupted, the upgrade will fail, but the
unit continues to operate, with the previous version. The USB- connection is faster and more reliable.

Firmware upgrade over the air

It is also possible to perform a firmware upgrade over the air. For this you must use the software-package
“terminal link”. It allows you to modify or upgrade your data logger from remote. For more information
consult your local Observator Instruments dealer.

Firmware Driver limitations

The data logger is equipped with various drivers, for several tasks. The number of total drivers is limited to
16. This means you can choose maximum 16 drivers from all the drivers available. Each driver can handle
(collect or send) a number of parameters. The total number of parameters is limited to 64. So, theoretically,
the data logger can handle up to 16 sensors with each 4 parameters. But in this case there is no output
possible. In most cases two or three drivers are needed for minimum operation (internal driver, tcp output-
driver, or email-driver). When a user has an additional analog sensor, it will take a driver as well.

Example:

«
...
78
79
80
81
82
...
»

Содержание OMC-042











































































































Отзывы:

Нет отзывов

Похожие инструкции для OMC-042

Бренд: Ebro Страницы: 24

Бренд: Fluke Страницы: 4

COMARK Diligence RF313-TH

Бренд: Fluke Страницы: 3

Бренд: Fluke Страницы: 62

Бренд: JERICHO Страницы: 16

Бренд: GUILCOR Страницы: 70

Бренд: Canary Systems Страницы: 69

Бренд: Keithley Страницы: 83

Бренд: SS Telecoms Страницы: 37

Бренд: T&D Страницы: 15

Бренд: Signatrol Страницы: 36

Бренд: TENDO Страницы: 13

Бренд: HBM Страницы: 1160

Бренд: HyQuest Solutions Страницы: 24

Бренд: HyQuest Solutions Страницы: 37

Бренд: HyQuest Solutions Страницы: 109

Бренд: HyQuest Solutions Страницы: 137

Бренд: DEWESOFT Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды