OBID
i-scan
®
HF
Installation
ID ISC.PRH200
FEIG ELECTRONIC GmbH
Page 8 from 37
M31210-2e-ID-B.docx
1.3 Maintenance
The reader ID ISC.PRH200 is a design product with high quality surfaces, and should always be
handled with caution. The Device was designed to work reliably and flawlessly for years without
special maintenance.
Attention! The surfaces should be cleaned with a clean, soft cloth dampened in a dishwash-
ing liquid – water solution.
To improve the durability and the appearance, please follow the instructions below:
•
Keep the reader clean and take care the reader is not scratched. Also regularly apply specific
antistatic products for acrylic surfaces.
•
Regularly remove dust and other impurities with a soft cloth and a solution of water with a little
dishwashing liquid.
•
Keep the reader dry. All kinds of moisture should be avoided during operation and storage.
Precipitation, humidity and liquids contain minerals that will corrode electronic circuits and
damaging transparent plastic parts.
•
Avoid storing or operating the reader at dirty or wet locations. The surfaces or electronic com-
ponents may be-damaging.
If any device not working properly, please contact the appropriate representative.
1.4 Assembly of the wrist strap
The included hand strap is mounted on the provided eyelet and tightened.
To avoid damage, the hand strap to secure it against falling should always be used.
Fig. 1: Assembly of the wrist strap
