OBID
i-scan
®
HF
Installation
ID ISC.PRH200
FEIG ELECTRONIC GmbH
Page 6 from 37
M31210-2e-ID-B.docx
1.1 Safety Instructions / Warning - Lithium-ion battery
•
Use the battery only in the intended device from Typ ID ISC.PRH200.
•
Improper use, damaged chargers or battery packs of injury and fire hazard
•
Expose the battery pack for no deviating from the technical data of environmental influences.
Moisture and water, dust, heat, shocks and pressure can damage or destroy the battery pack.
•
To use a damaged, deformed or not original sealed battery pack is prohibited. You must be
disposed of properly and Expertly and may no longer be shipped in Packet
•
Lithium-ion batteries must not be in the trash, they must be disposed of separately. Find out.
upon the local authorities to suitable collection
•
Charge the battery only with the original by FEIG ELECTRONIC GmbH supplied battery
charger.
•
During charging, the ambient temperature should be between 10°C and maximum 45 °C. A
slight warming of the battery during charging and in use is normal.
•
Store your battery in a cool, dry place. Permitted temperature range according to technical
data.
•
The battery pack must never be shorted out. A short-circuit the battery pack can be very hot,
break and break explosively
•
Avoid reverse polarity of positive and negative poles. The battery pack may be damaged or
destroyed.
•
Do not heat or throw the battery pack of in fire. Do not charge and leave the battery pack at the
high temperature. The battery pack may ignite explosively and break
•
Never disassemble the battery pack. If disassembled battery pack, safety protection circuit may
cause breaking and not operated safety system for charge and discharge. May cause heating,
igniting and breaking of cell.
•
Do not solder to terminal of battery pack. Safety protection circuit may cause breaking and may
be not operated safety system for charge and discharge. If heat up battery pack over 90°C,
plastic parts may be melting and cell may be leaking and may cause heating, igniting and
breaking by short-circuit internally.
•
Do not subject the battery and replace the battery, no strong shocks or a strong impact.
•
Do not leave the battery unattended during charging.
•
Make sure that the battery label always remain on the battery pack. The information’s printed
on the label have to be visible during handling the battery pack.
